How to Improve Your Radiator Efficiency and Performance

Temperatures are starting to drop, and that’s just the beginning. The upcoming onset of winter will force many households to use radiators. This will put many families to the test: they will have to be creative and find certain alternatives in order not to ruin themselves at the end of the month. In order not to drive up the electricity bill while staying warm at home, it is important not to waste the heat provided by radiators. This trick is timely: a single spoonful of this product will give you unexpected results. Discover it!

What should be placed on the radiators to save energy?

Before even mentioning the energy consumption, you should be aware that the continuous use of a heater with high temperature at home can cause health problems in children and the elderly. The recommended range is generally between 65 and 70 °F. A warmer temperature would be harmful, not to mention the risk of inflating monthly bills. However, if you want to save money, you should be careful not to disperse the heat from the radiators. It may seem trivial to you, but poor maintenance can cause malfunctions, preventing you from saving money on the bill. If the heater is clogged, it can affect its main function: If heat isn’t being delivered properly, the unit risks using more energy, which directly affects your bill. To clean your radiators and effectively remove all dust and dirt residues, the following trick is very promising. Who would have thought it, but a simple spoon of lemon combined with baking soda will do the trick perfectly! Here’s how:

Prepare the solution: Pour into a glass of water a spoonful of lemon juice and a little baking soda. Apply this mixture to your radiators with a clean cloth. Rinse and let dry. And voila! Your radiators are clean, sanitized and ready to go again. As a bonus, you’ll have the pleasant surprise of smelling a fresh and lemony scent as soon as you turn them on.

Another tip: for a very effective cleaning, you can also alternate with this other remedy. It consists of using a spoonful of white vinegar, to which you can also add the same amount of alcohol and a quart of water. In this way, the heaters will be perfectly degreased and free of any dirt.

Other smart ways to optimize the heater

Even in the middle of winter, it is necessary to ventilate in order to mitigate toxins and possible allergies caused by dust mites and mold. Therefore, it is necessary to ventilate the rooms briefly but intensively in the morning and evening. It is recommended to open the windows wide, let enough fresh air into the room and close them again after a few minutes. Such a technique is much more beneficial than leaving the window open for a longer time. Have you ever thought about ventilating your radiators? Sometimes we turn them on without realizing that they are not working properly. If the radiator is heating poorly even at maximum temperature, it probably means that there is air in it. To bleed a radiator, it is very simple: you just need to turn the small screw that is located on the top of the device. With a screwdriver you will quickly solve the problem. The compressed air inside can easily escape.

It goes without saying, but of course it would be wiser to close the bedroom doors to keep the heat inside. Knowing that it is always much easier to heat a small room than a large room. If you leave the door open, the warm air will escape from the room into the cooler hallway. This will give the impression that the room is not heated enough, and you will be tempted to raise the temperature a bit. And to think that a simple gesture of common sense can reduce the bill!

Load More Posts Loading...No more posts.