This Little-Known Trick to Switch your Windows to “Winter Mode” and Save Energy

When the temperature rises, the cold can enter your home very quickly through your windows. The reason PVC windows have become so popular in recent years, they actually have a feature that allows you to reduce your energy consumption and ultimately pay less in heating bills. Thus, you will successfully reduce your heating consumption during the cold season.

How can you reduce excessive heating costs thanks to your windows?

Although heating season is fast approaching for many (others are already here), here’s how you can lower your energy costs. For example, remember to uncover radiators – never hide them behind furniture or curtains. It is also important to properly ventilate the apartment, i.e after the knob is turned to the zero position, as well as install thermostats on radiators. Of course, it is also advisable to use the heat properly and not set the radiators to the highest heat output. Heating costs also decrease if we pay attention to the sealing of windows and doors. A practical trick, thanks to which we can use a little-known feature in PVC windows. Few people know that this insulation protects against outside temperatures.

How to switch your PVC windows to winter mode?

The winter mode of PVC windows is easy to set. This can be done by adjusting the seal accordingly. Find an adjustment roller, a characteristic metal pin in the frame of the movable window, which is visible after opening. With its help, we can adjust the tightness of the window as needed. To set the windows in winter mode, simply tighten the screw on the frame by about 100 grades. Sometimes it is enough to do this with your fingers or pliers, some models require a special key. When it gets warmer, just unscrew the pin again. Winter mode on windows is nothing more than pressing the seal harder against the window frame. As a result, less fresh air enters the apartment or house. Each function has advantages and disadvantages, and so do they. Sufficient air circulation reduces the risk of allergies.

Adjustment of this accessory, depending on the type, is done by turning by hand, using pliers or a screwdriver. In some cases, the mechanism must be pulled before turning on itself, and only then turned. The main seasonal adjustment point of window frames is the need to constantly transfer them from “summer” to “winter” and vice versa. With strong “winter” pressure, the rubber seal begins to gradually deteriorate. Often owners of PVC windows are faced with the fact that this rubber must be replaced after a few years. This happens precisely because, according to the window manufacturer’s instructions, the sash is not transferred to summer mode with a weakened clamp but is left like this after the winter.

These few tips are essential to reduce your heating costs in the winter at full use.

Load More Posts Loading...No more posts.